23
ACTIVESMART™ OPERATING INSTRUCTIONS
Using your ice maker
Ice On/Off
Your ice maker is designed to automatically dispense ice
into the ice storage bin below until it detects the bin is
full. The more ice you use, the more it makes.
First use
●
●
The ice maker will be off when you turn your
refrigerator on for the first time after installation.
The light above the ‘Ice On/Off’ icon will be off.
1
To turn your ice maker on press
to turn on the
ice maker. The light above the button will illuminate
indicating the ice maker is on.
2
Press the , and together for 4 seconds then close
the doors. The ice tray will empty the water into the bin below. The ice tray will only
empty after the doors are closed.
3
Repeat step
2
to remove dust in the ice tray collected during manufacture
and transport.
4
Empty the water, dry the bin and return it correctly.
5
Once your ice maker is turned on the first bin of ice may be discoloured. This is not
harmful and normal during the flushing process. Discard the first full bin of ice made.
Your ice maker is now ready for use.
●
●
Carry out the above steps after a holiday/vacation or extended periods of not using ice.
●
●
Note: The performance of your water filter will increase with use, reaching optimum
performance after two to three full bins of ice..
Turning ice maker on
Ice bin and scoop
