18
Information about your manual ice system
To make ice, take the ice tray and lid from the top of the ice storage bin. Remove the lid
from the ice tray and fill the tray with water. Place the lid back on the ice tray and carefully
position it back onto the ice storage bin.
Once the ice is solid, take the ice tray and lid off the ice storage bin, remove the lid from
the tray and twist the ice tray at each end in opposite directions. Turn the ice tray over the
ice storage bin to dislodge the cubes into the bin.
Fill the ice tray with clean water and repeat to fill the ice storage bin.
Attached to the ice storage bin is the ice scoop which provides hygienic access to ice.
To access ice cubes, take the ice tray and lid from the top of the ice storage bin and place
onto a flat surface. Take the scoop from the front of the bin, scoop cubes into vessel and
then replace the scoop, tray and lid back to the top of the bin.
For maximum ice storage, level the stored cubes around the bin with the ice scoop.
If ice is not used often, old cubes will become cloudy, taste stale, will shrink and may stick
together. Empty the ice storage bin periodically and wash in lukewarm water.
Dry thoroughly and place back in the correct position.
USING YOUR APPLIANCE
Manual ice system (selected models only)
An ice storage bin which sits inside the upper top freezer bin provides storage for and gives
you access to clean, clear ice cubes.
Upper left freezer bin, ice storage bin, ice
tray, lid and scoop in correct position
Accessing your ice
