21
USING YOUR APPLIANCE
Press the water dispenser pad to
dispense 4L of water.
Wait for 4 minutes before dispensing again.
Dispense another 4L of water. Your water
dispenser is now ready for use.
Water will continue to drip from the dispenser
for a few more days after installation
as the remaining trapped air is released
from the system.
NOTE: There may be carbon residue dispensed
together with water. This is not harmful, and
normal during flushing process.
To flush through the water dispenser
To flush through the automatic icemaker
1
2
Press and hold , and together for
4 seconds then close the door(s). The ice
tray will flip twice and empty the water into
the bin below. The ice tray will flip only after
the doors are closed.
Repeat the cycle to help remove any
dust in the ice tray collected during
manufacture and transport.
Empty the water in the bin and return the bin
correctly. Ensure that the scoop is located in
front of the bin.
Once your ice maker is turned on, discard the
first 3 harvests of ice (8 cubes per harvest).
This will flush away any impurities in the water
line and ensure the best ice quality.
Do the above steps after a holiday/vacation or
extended periods of not using ice.
Flushing the water filter
Before you start using the Ice & Water function, complete the flushing steps to ensure
optimum performance of your water filter.