9
INSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
Before installation
Power
●
●
Install your appliance where the plug is easily accessible.
●
●
Connect your refrigerator to a separate power point. Avoid sharing the power point with
other appliances. Do not use extension cords and double adaptors as the combined
weight of two power cords can pull the double adaptor from the power outlet.
●
●
For power requirements, refer to the information on the serial plate located at the front
bottom right-hand side of the refrigerator when the door is open.
●
●
Ensure your appliance is properly grounded (earthed).
●
●
Connect the appliance to the electrical supply (220V – 240V 50Hz) with the fitted plug
and lead.
●
●
Connections to the mains supply should be in accordance with local regulations.
Location
●
●
Do not place your refrigerator in direct sunlight or beside any heat generating appliance
such as a cooktop, oven or dishwasher.
Ice & Water and Automatic Ice models
●
●
Your Ice & Water and Automatic Ice refrigerator must be installed by an authorised
plumber or Fisher & Paykel trained and supported service technician as incorrect
plumbing can lead to water leaks.
●
●
Fisher & Paykel Appliances does not accept responsibility for damage (including water
damage) caused by faulty installation or plumbing.