28
B
D
C
A
E
Tools
Cross-head screwdriver
Powered driver (optional)
Hex key
FPA spanner
!9
DOOR PANEL INSTALLATION — STAINLESS STEEL
Attach the door panels
1
Open the door and loosen the M5x10 cross-head
screws (do not remove) at the sides of the doors (
A
).
2
Hang the door panel by inserting the M8 studs
through the holes of the hanging bracket (
B
).
3
Slide the forks of the side brackets onto the
screws of the door (
C
).
4
Screw the M8 washer and nut to each stud
(
D
), and re-tighten the side screws (
E
) using
the hex key and spanner to fix the door
panel (do not fully tighten). This will allow
opening the door without affecting
adjustment of the door panel.
