19
IMPORTANT!
●
The water connection instructions below are intended only for
the professional installer.
●
The appliance comes with a pre-connected plastic water tubing.
●
Water fittings are not supplied and must be purchased separately.
●
Ensure the appliance is connected to its own isolating switch.
●
Ensure there is enough tubing for the water connection and to pull
the appliance out for service, if required.
●
Flush water through the hose prior to connection to the appliance
to remove any debris in the hose.
Water fittings kit
(Ice and Water
models only)
Water tap adaptor
(1)
Collet locking clip
(1)
!3
WATER SUPPLY CONNECTION
3
Secure connection by inserting a locking key (
D
) between the water tap
adaptor and locking collet.
4
Connect the water tap adaptor to a water tap (
E
).
– Flush water through the hose prior to connection to the appliance
to remove any debris in the hose.
5
Turn on the water tap and check all connection are dry and free of drips.
B
C
D
2
Insert (
B
) the free end of the plastic water tubing fully into a water tap
adaptor and pull (
C
) gently to ensure it is locked in.
Connect to water supply (Ice and Water models only)
1
Move the appliance in front of the cabinetry close enough that you still have
access behind for power and water connections (
A
).
A
E
