20
Connect to power supply
1
Locate the power cord and connect the fitted plug to the electrical supply
(230VAC, 50Hz). Turn ON the appliance.
– We recommend to use an isolating switch that can be accessed
easily after the appliance is installed.
Alternative water and electrical connection (above the cavity)
1
Connect the water fittings to the water supply (
C
).
2
Plug-in the power cord to the electrical supply (
D
), and turn on the
appliance.
3
Attach the power cord clip to the back of your appliance, and secure the
excess power cord length onto the clip (
E
).
– When pushing the appliance into position, take care not to roll over
or damage the power cord and / or water tubing.
Refer to 'Electrical and Plumbing' for more information on recommended
and alternative water and power connections.
DETAIL B
SCALE 1 : 5
B
D
C
2
Attach a power cord clip (
A
) to the back of your appliance.
3
Secure the excess power cord length onto the clip (
B
).
Internal box
Y
Miscellaneous
components
Power cord clip
(2)
E
A
!4
POWER SUPPLY CONNECTION
