40
0
Front of
cabinet
C
~ 254mm
~ 1016mm
~ 1753mm
50mm
50mm
D
B
1
Break off the datum lip to each side trim bracket and discard.
Repeat for all side trim brackets.
Discard
A
Plastic
Aluminum
Internal box
D
Cabinet side
trim install kit
Side trim bracket
(6)
#8 x 16
M
ush W
asher
Twin T
hr
ead
Philips S
cr
ew
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8x16 mush washer
screw (12)
External box
Cabinet side trim
(2)
Tools
Hacksaw
Cross-head screwdriver
Pencil
For 2032mm cavity installation only
2
Measure 102mm from the top of the
side trim with a square ruler and
mark a cutting line (
A
).
3
Cut along the line using a fine tooth
hacksaw to a length of 1930mm (
B
).
IMPORTANT!
●
Ensure the cut is straight and square
as this is an exposed surface.
●
Ensure the plastic part does not
bend as this can cause visual
stress marks.
Repeat for the remaining side trim.
4
Position three side trim brackets on one side trim. Refer to (
B
)
for bracket locations.
5
Open the French doors. Measure 50mm from the front of cabinet
(from behind the doors), to the front of the alcove and accurately
mark a vertical line (
C
).
6
Align the bracket edge with the marked line and fix the bracket
to the cabinetry with #8x16 mush washer screws (
D
).
Repeat on the opposite side.
IMPORTANT!
Ensure correct positioning of bracket to preven inaccurate fitting
of side trim or gaps existing between side trim and appliance.
@6
CABINET TRIMS INSTALLATION — [B] FIXED SCREW METHOD
