20
Drying cycle options
Wrinkle Free
If you wish to minimise wrinkling, select one of the WRINKLE FREE options. At the end
of the cycle, the drum will rotate periodically and cool air will be circulated through the
load to minimise wrinkling and creasing. This is particularly useful if you cannot remove
the items immediately after the cycle ends. There are two WRINKLE FREE options:
ON provides WRINKLE FREE operation for 2 hours.
ExTRA provides WRINKLE FREE operation for 24 hours.
If you wish to stop the dryer at any stage during the WRINKLE FREE stage of the
cycle, simply touch START/PAUSE. You can then open the dryer door and remove
your items. Press POWER to stop the cycle and turn the dryer off.
Signal
The SIGNAL option automatically defaults to ON for all cycles. This means a series
of beeps will sound at the end of a cycle, to alert you that the dryer has finished.
You can turn the SIGNAL OFF by touching the SIGNAL button twice (no lights will
then be illuminated).
When you select a DRYNESS LEVEL above DAMP/DRY and wish your dryer to alert
you to remove items once your load reaches the DAMP/DRY stage, touch the SIGNAL
button once to select DAMP DRY. Ensure ON is also selected. When your load reaches
the DAMP/DRY stage, the dryer will beep to alert you to remove your items, then
continue drying until the remaining load reaches the dryness level you selected.
Indicators
There are a number of indicators to alert you when you need to attend to your
machine, either to clean the lint filter, empty the water tank or to clean the
condenser (refer to pages 23 and 24 for more information).
Keylock
This option enables you to deactivate the buttons on the display panel, except for the POWER
and KEYLOCK buttons. This option helps prevent accidental button presses.
To turn Keylock mode ON or OFF, at any time when the dryer is powered on:
■
■
Touch and hold the KEYLOCK button for 2 seconds.
Note: when activated, the light above the KEYLOCK button is illuminated.
If Keylock mode is activated and the machine is powered off:
■
■
To turn your dryer on, press the POWER button, then touch and hold the KEYLOCK button for two
seconds to turn Keylock off. Select your drying cycle, any options and then touch START/PAUSE to
start the cycle.
Fig.17
Wrinkle free
option
Fig.19 Indicators
Fig.18
Signal options
