11
PRIOR TO INSTALLATION
Locate the attachment position of
the anti-tip brackets in both sides
of the cabinetry,
Ensure the location of the anti-tip
brackets matches the location of
the side brackets of the drawer.
Refer to 'Product dimensions' for
location of side brackets.
Secure the anti-tip brackets with
screws.
INSTALL THE AIR FILTER
REMOVE THE TRANSIT SCREWS
The transport screws must be removed before starting up for the first time to avoid damage
to the drawer.
INSTALL THE ANTI-TIP BRACKETS
The anti-tip brackets prevent the drawer from tipping over when opening the drawer. Do not
open the drawer if the anti-tip brackets are not installed.
2
Insert the locking cap in the holder.
3
Use a slotted screwdriver to screw the
air filter into the air filter opening.
1
Pull out the locking cap with pliers.
4
Slide the air filter cover over the air filter
opening.
locking cap
holder
air filter cover
air filter
Unscrew the transport screws from under
the power cable and holder.
transport
screws
holder
power cable
