• Hang hood off upper hood mounting screws with 2 mm gap. Hang off the keyhole attachment points on the back
of the hood (see Fig.5). Tighten screws.
• Attach lower hood mounting screws to fix hood to wall.
• Reattach air flow balancing plate and filters.
5.
Attach ducting
• Attach ducting to ducting adapter using aluminium duct tape.
6.
Attach chimney
• Bend the tabs on the chimney (
A
).
• Place chimney around the hood chassis and hang off the bracket (
B
).
• Extend the upper chimney and attach to the chimney bracket with 10 mm screws (
C
).
https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC90DCXB3/User_Guide_HC90DCXB3/03_Installation_instructions
Updated: Wed, 06 Mar 2019 11:36:04 GMT
Powered by
11
