16
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Fan has turned
off automatically.
Fan, light and
power buttons
will illuminate red.
This blower is equipped with
a sensor to automatically
turn OFF the fan when
excessive heat is detected
by the range hood.
Remove the source of heat,
wait until the control panel
buttons are no longer illuminated
before attempting to restart the
range hood.
Fan has turned
on automatically.
The fan speed
buttons will
illuminate red.
The heat guard sensor has
activated. The range hood has
detected high temperature
and has turned the fan on
automatically.
To override press the fan speed
buttons or turn the range hood
on/off. We recommend leaving
the range hood on to remove
excess cooking heat.
Refer to ‘Heat guard’ for
further details.
Filter will not
fit back into
the range hood
The filter has been inserted
the wrong way around.
Turn the filter the other way
round and try to insert again
following the steps detailed in
‘To replace the filters’.
Filter alert
button is lit red
Filters require cleaning.
Turn off the range hood, remove
the filters, clean filters and replace.
Refer to ‘Filter cleaning’ for
further details.
Grease is
dripping from
the range hood
The filters are saturated with
grease and need to be cleaned.
Turn off the range hood, remove
the filters, clean filters and replace.
Refer to ‘Filter cleaning’ for
further details.
Excessive
condensation
appears on the
range hood
surfaces
●
●
Using an induction cooktop
●
●
High ambient temperature,
humidity or low natural
ventilation in the room
●
●
Height of rangehood
installation.
Condensation can be minimized,
refer to ‘For best performance’
for details.
The lighting is
too dim
Lighting brightness needs
to be increased.
Press the button to increase
the brightness of the lighting.
Press and hold the button to go
straight to the brightest lighting.
Refer to ‘Light’ for further details
on adjusting the brightness.
Range hood
surfaces
discolored
Incorrect cleaning product
has been used.
Refer to ‘Cleaning and Maintenance’.
TROUBLESHOOTING
