14
Humidity control
Each fruit and vegetable bin has a humidity control button that can be adjusted to care for fruit
■
■
or vegetables depending on what is stored in the bins. The humidity controls are located on the
left hand side of the CoolDrawer (as shown in fig 3, on the previous page).
If possible, try to store fruit and vegetables separately. This will help to extend their storage life.
■
■
If there is too much water in the bins (due to the high humidity in the bins), the control can be
■
■
adjusted to the FRUIT setting and/or the water can be wiped out as required.
Remember a small amount of water in the bins is beneficial for fruit and vegetable storage. The
vegetable screens, in the bottom of the bins, will ensure that fresh produce is held above any
moisture in the bottom of the bins to retain optimum freshness.
To adjust the humidity setting:
The picture on the top of the humidity control button will show the current
setting. To change the setting, simply push the adjustment button.
Suitable for:
Suitable for:
Salad greens (high humidity)
– Lettuce
– Spinach
Fruit with skin/ peel (reduced humidity)
– Apples
– Pears
– Kiwifruit
Broccoli
Cabbage
Carrots
For a more detailed list please refer to pages 22 – 24.
Customising the storage environment
