background image

www.fisherpaykel.co.nz   www.fisherpaykel.com.au   www.fisherpaykel.co.uk   www.fisherpaykel.ie

    599480D  NZ AU GB IE  07.09

  

TO BE COMPLETED BY THE INSTALLER

  

Have you used the correct fixing screws?

  

Have you used the wall anchors provided?

  
  

Have you used the washers provided?

  

Have you made sure that all standard requirements for ducting/   

 

  

recirculation and electrical connection are met?

  

Is the VentSurface set for the correct cooktop type and filter mode?

  

Is there a means of disconnection from the mains electricity  

 

 

  

supply (disconnection switch or power outlet) accessible to the customer  

  

after installation?

  

Have you removed the protective blue film from the stainless steel surfaces?

  

Is the VentSurface earthed?

  
  

OPERATION: 

  

Have you informed the customer about the cleaning alerts?

  

Have you demonstrated the basic operation to the customer?

Installer’s name:

Installer’s signature:

Installation company:

Date of installation:

   

LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER

FINAL CHECKLIST

12

(2,2)  -2- 599480D izona vswall install A2 NZGB.indd 21/7/09 2:43:07 PM

(2,2)  -2- 599480D izona vswall install A2 NZGB.indd 21/7/09 2:43:07 PM

Summary of Contents for IZONA HC90








Reviews: