Fisher & Paykel OD30WDX2 Installation Instructions Manual Download

Page: 2 / 7

Cut Out Dimensions

• The Warming Drawer should be installed into a

base cabinet with minimum outside dimensions of
13-1/4” high by 30” wide by 24” deep.

• Power supply required: 120Volts AC; 5 Amp min.,

15 Amp maximum circuit requirement.

Fig. 04

Wall Cabinet Installation

DOUBLE Wall Oven and Warming Drawer Installation

SINGLE Wall Oven and Microwave and Warming

Drawer Installation

Fig. 05

Updated: Sun, 14 Jun 2020 18:16:52 GMT

Summary of Contents for OD30WDX2

Page 1: ...lation Cut Out Dimensions The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at least 24 see Fig 04 https producthelp fisherpaykel com us Cook Built In_Ovens Single OD30WDX2 User_Guide_OD30WDX2 03_installation_in Updated Sun 14 Jun 2020 18 16 52 GMT Powered by 1 ...

Page 2: ...120Volts AC 5 Amp min 15 Amp maximum circuit requirement Fig 04 Wall Cabinet Installation DOUBLE Wall Oven and Warming Drawer Installation SINGLE Wall Oven and Microwave and Warming Drawer Installation Fig 05 https producthelp fisherpaykel com us Cook Built In_Ovens Single OD30WDX2 User_Guide_OD30WDX2 03_installation_in Updated Sun 14 Jun 2020 18 16 52 GMT Powered by 2 ...

Page 5: ...ip mounting clips see Fig 12 3 Use the two supplied 1 1 2 long screws through the two embossed holes see Fig 13 to secure the front of the Warming Drawer Fig 11 Fig 12 Fig 13 https producthelp fisherpaykel com us Cook Built In_Ovens Single OD30WDX2 User_Guide_OD30WDX2 03_installation_in Updated Sun 14 Jun 2020 18 16 52 GMT Powered by 5 ...

Page 7: ...x screws The force necessary to open and close the drawer can be changed by adjusting the two flathead screws Fig 16 Fig 16 https producthelp fisherpaykel com us Cook Built In_Ovens Single OD30WDX2 User_Guide_OD30WDX2 03_installation_in Updated Sun 14 Jun 2020 18 16 52 GMT Powered by 7 ...