18
Installation instructions
Replacement of burner injectors
If the injectors are not supplied, contact the Fisher & Paykel Authorised Service Centre.
Select the injectors to be replaced according to the “Table for the choice of the injectors”.
To replace the injectors
Remove pan supports and burners from the cooktop. Using a wrench substitute the
nozzle injectors with those most suitable for the kind of gas for which it is to
be used. The burners are designed so that adjustment of primary air is not required.
Figure 13 Auxiliary, semi-rapid and rapid burner
Figure 14 Triple ring wok burner
700 mm
Rear wall
Suggested area for
gas mains connection
200 mm
Rear wall
Suggested area for gas
mains connection
Figure 12 Gas mains connection area
Injector
Injector