12
INSTALLATION INSTRUCTIONS — REFRIGERATOR
1. Preparations before installation
1
Door hinge
This model is right-hand hinged, with a left-hand door opening. If required, you can
change this model to left-hand hinged and right-hand door opening.
●
To do this, use a flat-head screwdriver to remove the covers to the left and right of
the control panel.
●
Lever the left and right hand covers from the outer edge (A) as levering from the
inner edge may cause damage the to the trim and the control panel.
●
Lever the hinge cover from the inner edge (B).
C
28
Shelves
Your refrigerator is fitted with shelves specially
designed to retain spills, making clean up easier.
The shelves can be repositioned at different heights
to accommodate different food storage container
To remove the shelf, use the front edge to pull the
shelf forward (Fig.17).
Fruit and vegetable bin
The fruit and vegetable bin provides a humid environment for your produce ensuring moisture
is retained, nutrients are locked in and your fruit and vegetables are kept fresher for longer.
To remove the bin, pull it out until it stops, then lift and continue to slide the bin until it is fully
extended.
Fruit and vegetable bin humidity slide
The bin has a humidity control slide that can be
adjusted to fruit or vegetable setting depending
on what is being stored in the bins.
■
■
If you are storing fruit, set the humidity slide to the fruit setting.
■
■
If you are storing vegetables, set the humidity slide to the vegetable setting.
■
■
If you are storing a mixture of fruit and vegetables, position the humidity slide in the centre.
Humidity mat
The humidity mat is designed to hold your fruit and vegetables off the base of the bin.
Increased air flow around your produce prevents rotting.
Door shelves
Door shelves can be moved to meet individual storage
needs.
To remove the door shelf, lift the shelf up and pull
straight out (Fig.18).
To install place shelf in desired door liner retainer, push
down gently until shelf stops.
Interior features
Fig.17 Shelf removal
1
2
1
2
Fig.18 Door shelves
Fig.
X
Humidity Control graphic
Toni to get layout of this page working a
bit better once content is final
Bullet
point?
Bullet
point?
Bullet
point?
Bullet
point?
Bullet
point?
Left hand cover
Right hand cover
Hinge cover
Control panel
A
A
B
●
Remove the upper and lower hinges (
C
)
and refit them to the opposite side.
