21
INSTALLATION INSTRUCTIONS — REFRIGERATOR
8. Top adjustment of the cabinet doors
Height adjustment of the cabinet door
1
Turn the height adjustment nuts (
A
) with a hex key.
●
We recommend to use a T-handle hex key so that the height adjustment nuts can be
turned easily without being blocked by the magnet sensor.
●
If the height adjustment nuts cannot be adjusted, check the left and right clearances of
the top hanging bracket.
Side adjustment of the door panel
2
Loosen the side adjustment nuts (
B
) and move the door panel slightly sideways to
adjust the side alignment.
●
We recommend to use socket spanner to loose or tighten the nuts N so that it can be
turned easily without being blocked by the magnet sensor and cabinet door.
Depth adjustment of the door panel
3
Loosen the depth adjustment nuts (
C
) and move the door panel forward/backward to
adjust the depth position.
4
Tighten the nuts fully after you are satisfied with the adjustments.
Socket spanner
SCALE 2:1
C
A
B
We recommend to use a socket spanner to loose
or tighten the nut (A) in case of interference.
Adjusting top of cabinet door