29
!6
DUAL INSTALLATION
Fixing the second appliance inside
the cabinetry
1
Fix the top caps of first and second
appliances to the central spacer with
the top joiner fastener kit (
A
).
2
Fix the bottom joiner brackets of both
appliances together with the bottom
joiner kit (
B
).
– Place the plastic washers
between the bottom joiner
brackets before fixing with the
screw and nut. Tighten with M4
hex key.
3
Fix the top brackets (
C
) and bottom
alcove side bracket (
D
) of the second
appliance to the cabinetry with .
8Gx16 countersunk screws.
4
Do final alignment check. Ensure the
feet of both appliances are positively
engaged with the floor.
A
C
B
D
C
Required components/tools:
●
●
Top joiner fastener kit
– 1x M5x20 Cap screw
– 1x M5x16x1 Plain washer
●
●
Bottom joiner fastener kit
– 1x M6x16 Washer screw
– 2x M6x12x3.2 Plastic washer
– 1x M6 Hex nut
●
●
5x 8Gx16 Countersunk screw
●
●
M4 Hex key
Note: Image shows second appliance (30” model) with 2 top brackets.
Alcove side bracket
D
C
Bottom joiner brackets
B
Top joiner brackets
with central spacer
A
