27
ALIGN DOOR PANEL
SECURE DOOR PANEL
Locate the top of the door to the two
mounting screws and lower.
2
Loosely tighten the side screws and the
top M8 washers using the spanner and L
key provided in the install kit.
2
Install kit D
Using a piece of tape, fit a tab on the
door to assist in opening the door
without disturbing panel settings.
4
4
Fit side screws to panel using the short
crosshead tool provided in the install
kit. For 90° door opening installs, the
supplied crosshead key should be used
on the hinge-side.
Tighten all side screws and the top M8
washer and nut to secure.
Install kit D
Ensure top mounting screws have
been loosened and sit at their
lowest position.
1
Ensure side brackets are disengaged
and the top mounting screws have
been loosened. Rotate the mounting
studs clockwise to lower the panel and
anticlockwise to raise it.
1
Install kit D
We recommend loading the shelves in
the door with 33lb (15kg) weights to
ensure accurate panel gap widths.
3
Push panel side-to-side to adjust
horizontally. Ensure panels are flush with
front of cabinet.
3
