23
!2
INSTALL WATER FILTER CARTRIDGE AND KICKSTRIPS
2
Pull the freezer drawer out slightly and insert the filter cartridge and tool into the bottom
left of the product. Firmly push the cartridge in until the filter head cannot be pushed
any further.
IMPORTANT!
●
●
The water filter head must be firmly pushed into the product and secured, incorrect installation can lead to water leaks.
●
●
It is not necessary to shut off the water supply when installing the water filter.
Filter cartridge in the locked position.
USE THIS VIEW TO CORRECT THE VIEW FOR AIR FILTER
US 80 PLUMBING INSTALLATION
SCALE 1.000
SCALE 1.000
SCALE 1.000
Front view
3
Turn 90° clockwise to tighten. Remove filter cartridge tool and close freezer drawer.
4
Installing kickstrip filter
Remove filter from inside the product. Fit the filter onto the rails and push to
the rear until it clips securely (refer to
A
).
A
1
Remove the red protective cap on the spigot head and align the filter cartridge tool over the
filter handle
5
Top kickstrip grille
Ensure the top grille is inserted in the correct orientation (refer to
B
). Align the top grille
clips to the top plinth slots then firmly push grille onto appliance until the clips engage
(refer to
C
).
B
C
