9
5
PRODUCT AND CAVITY DIMENSIONS
DOOR OPENING AND CLEARANCE DIMENSIONS
inches (mm)
A
Depth of door (widest opening) measured from front of door
37” (940)
B
Depth of drawer (open) measured from front of cabinetry*
14 3/16” (360)
C
Minimum door clearance** to adjacent wall*
(115° – full internal access)
16 1/8” (410)
D
Minimum door clearance** to adjacent wall*
(90° – reduced internal access)
4 3/8” (110)
*
Does not include the custom door panels or handles to be manufactured and fitted by cabinetmaker.
** Measured from front cabinetry edge.
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
c
A
b
b
a
d
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
c
A
b
b
a
d
Wall
Wall
115° DOOR OPENING
(FULL ROTATION)
90° DOOR OPENING
For 90° door swing a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge (refer to
Z
).
WARNING!
●
●
Before opening doors to the product, ensure the product
is on its base packer and the polystyrene stability blocks
are still in place. Failure to follow these instructions
could lead to serious injury or death.
●
●
Drawer must be closed when fitting hinge limiting pin.
1
Open door to 90°.
2
Using a hammer, drive the hinge limiting pin through the
boreholes which are now vertically aligned.
Z
