57
Handle assembly
Retainer blocks are pre-assembled at the bottom of both ends of the handle.
Cradle assembly
A retainer block is pre-assembled at the bottom of each cradle. Use a spacer to correctly
position the cradle and avoid wine bottles being too upright resulting in bottles tipping over.
Align handle to the front end of
display rack.
2
Insert retainer block at desired
location between slats of display
rack. Do not tighten.
1
Place ‘cradle guide’ on the slats
behind the handle..
Align cradle on spacer based on
size and type of wine bottle.
2
Rotate the retainer block to lock
position, and tighten screw.
Remove cradle guide from the rack
after use.
3
Loosen the screws until the
retainer blocks can be inserted
between slats of display rack.
1
Rotate retainer block to lock
position and tighten screw to lock
handle in place.
3
Write the name or type of wine on
the label.
Wine label kit
1
Fit label over front edge of rack to
match displayed wine.
2
Wipe the labels with a damp cloth
to erase.
3
WINE DISPLAY FOR WINE CABINET
Summary of Contents for RS4621F
Page 2: ......
