61
A
b
f
e
D
c
CHANGE THE DOOR HINGES (OPTIONAL)
1
Reinstall the hinge top bracket and bracket spacer with M5x12 countersunk
screws (
A
) on the new hinge side at the other side of the appliance.
2
Install the new hinge pocket and alcove top bracket on the new hinge side using
two (2x) M6x16 countersunk screws (
B
).
z
The new hinge pocket and top alcove bracket are supplied with the hinge kit.
3
Install the new hinge in the new hinge pocket by screwing M6x16 countersunk
screws (2x) (
C
).
4
Open the hinge (
D
) and clip the top hinge pocket cover (
E
) to the
top hinge pocket.
5
Install a new top alcove bracket on the new
non-hinge side (
F
).
1
Reinstall the middle hinge
bracket and spacer with M5x12
countersunk screws (
A
).
2
Open the middle hinge (
B
) and
reinstall the hinge with M6x16
countersunk screws (
C
).
C
B
A
Re-attach the top door hinge
Re-attach the middle door hinge — wRefrigerator-Freezer
1
Install a new lower hinge bracket
on the new hinge side with M6x16
screws (2x) (
A
).
2
Ensure that the tab on the top of the
bracket inserts into the slot in the
plinth front bracket.
3
Use the hinge that was removed from
the top of the appliance and insert
the tabs into the hinge lower bracket.
Rotate the hinge into place and fix with
M5x12 countersunk screws (2x) (
B
).
4
Open the hinge (
C
), and install the new
top grille assembly.
5
Fasten in place with #8x16 screws (3x)
(
D
).
One each at the bottom left and
right of the grille and one behind the
water filter hatch.
6
Clip the bottom hinge pocket cover to
the new hinge pocket (
E
).
Re-attach the bottom door hinge — Refrigerator or Freezer / Wine Cabinet
E
d
C
A
B
D
D
Summary of Contents for RS4621F
Page 2: ......
