20
JOIN PRODUCTS (MULTIPLE PRODUCT INSTALLS ONLY)
HINGE SWAP (OPTIONAL)
Secure the bracket at the front base
using four screws.
2
!0
Swap alcove bracket with the hinge
bracket. Secure using 3 screws at the
top of the cabinet.
Joiner kit A
Secure the bracket at the rear base
using four screws.
!2
Refit both centre hinge covers by
aligning to the hinge as shown, and
sliding across to clip back hinge covers
into position.
Joiner kit A
3
4
!1
Slot the door back onto the screws
and tighten using a torx key to tightly
secure. Refit the door shelves.
Repeat steps for lower door.
Secure the bracket at the front top
using four screws.
Joiner kit B
1
9
Partially refit the 4x hinge screws.
Secure the bracket at the rear top
using four screws.
Joiner kit C
