25
DOOR PANEL PREP
CUSTOM PANEL
4
Align the centre door panel bracket to
panel ensuring the ‘V’ in bracket is to sit
on the centreline.
Secure the handle to the panels using
4xM5x25 hex screws per handle.
Ensure handle fixings do not interfere
with side brackets.
8
Recheck door panel size and
specifications ensuring all bracket
locations have been marked. Refer to
page 14 for details.
Alternately, the supplied door panel
template can be used to mark
bracket locations.
1
Align the side brackets to panel.
5
Install kit F
Remove both washers and nuts and set
aside. Lift the panel brackets outwards
to remove.
3
7
Secure the side brackets using two
screws per bracket. Ensure side brackets
are fitted tightly and the fasteners are
secured straight.
Remove both top covers using a
powered driver. Set aside.
2
Using the screws supplied in the install
kit, secure the door panel bracket using
seven screws.
6
