12
INSTALLATION INSTRUCTIONS
water supply connection
ImpORTANT!
●
●
It is recommended to have this product installed by a qualified technician.
●
●
DO NOT use with water that is microbiologically unsafe or of unknown quality.
●
●
wARNINg – connect to potable water supply only to ensure water hygiene in the
ice maker and water dispenser.
●
●
DO NOT install on line pressure above 600 kPa or below 150 kPa.
●
●
DO NOT use on hot water supply (25°C max).
●
●
DO NOT cut any length of tube shorter than 500 mm.
●
●
DO NOT install near electrical wires or water pipes that will be in the path of drilling
when selecting the location of the filter system.
●
●
DO NOT mount the filter in such a position that it will be struck by other items, such
as wastebaskets, etc.
●
●
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure
to light can weaken plastic components.
●
●
DO NOT install the filter in a location that is susceptible to freezing temperatures as
damage to the filter housing could occur.
●
●
DO NOT screw the filter to the refrigerator.
●
●
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling
cavity.
●
●
AVOID contamination of pipes during installation.
●
●
DO NOT use copper tubing. The plastic tubing supplied should always be used.
●
●
DO NOT continuously dispense water for a period longer than 1 minute.
●
●
The water connection instructions are intended for the professional installer.
