Using Your Dryer
Wrinkle Free
Minimizes the likelihood of wrinkles forming in clothes if you
are not able to unload the dryer straight away.
WRINKLE FREE
rotates the drum periodically after the cycle has
finished, tumbling and blowing cool air through the clothes to
ensure they remain wrinkle free.
WRINKLE FREE
uses very little
power and will continue for up to 24hrs or until the dryer is
turned off. After completing each tumble SmartLoad™ will give
an ‘End of Cycle’ beep to remind you that the load is dry and
can be removed.
To stop
WRINKLE FREE
press either
POWER
or
START/PAUSE
.
SmartLoad™ will open the drum door and unlock the lid so you
can remove your clothes.
WRINKLE FREE
can be selected on any cycle and can be turned
ON
or
OFF
at any time during the cycle.
While
WRINKLE FREE
is in motion, only the
WRINKLE FREE
light, the
CYCLE
light and the
LID LOCKED
light will be lit.
6. Selecting the Dryness Level
The desired dryness level can be altered. There are five dryness
levels to choose between:
EXTRA DRY
DRY/EXTRA DRY
DRY
DAMP/DRY
DAMP
Refer to page 11 for Dryness Level descriptions.
The dryer defaults to the
DRY
setting. To change this, press
either the up or down arrow to move to your desired dryness
level. If you choose the
DAMP/ DRY
or
DRY/EXTRA DRY
setting, two lights will be displayed.
At the end of the cycle, if the clothes are still damp or are too
dry, next time just adjust the dryness level on the touch pad to
meet your personal preferences.
17