Lit. No. 72446, Rev. 05
105
November 15, 2020
NOTE: Loosen fill plug slowly to relieve any
pressure in the reservoir.
c. Turn the control ON and raise and lower
the snowplow several times. Activate the
control FLOAT function and manually
collapse the lift ram all the way (not
required for HT Series blades) after
each lowering of the blade. Turn the
control OFF.
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
MAINTENANCE
d.
Add more fluid as needed.
HT Series™ Blades:
Fill the reservoir to
within 2-1/2" from the top of the fill hole
and replace the fill plug.
All other Straight Blades:
Fill the
reservoir to the top of the fill hole and
replace the fill plug.
