Lit. No. 72446, Rev. 05
34
November 15, 2020
ATTACHING SNOWPLOW TO VEHICLE
WARNING
Keep 8' clear of the blade when it is being
raised, lowered, or angled. Do not stand
between vehicle and blade or directly in
front of the blade. If the blade hits or drops
on you, you could be seriously injured.
ATTACHING SNOWPLOW
WARNING
Inspect snowplow components and
fasteners for wear or damage whenever
attaching or detaching the snowplow.
Worn or damaged components could
allow the snowplow to drop unexpectedly.
NOTE: The blade must be in the straight position
when attaching or detaching the snowplow.
NOTE: Use dielectric grease to prevent
corrosion on all connections.
NOTE: Use lubricant on connecting pins to
ensure ease of attach/detach.
Attaching Steps:
1. Pull pin release handle and push down to pull
out connecting pins.
HS Compact Plow:
Verify that both connecting
pins are locked into the receiver notch.
2. Drive vehicle slowly forward.
HS Compact Plow:
Engage rear receiver
pins completely into the headgear slots. Apply
vehicle parking brake.
WARNING
Keep fingers away from snowplow and
truck attachment points.
