Lit. No. 72446, Rev. 05
35
November 15, 2020
ATTACHING SNOWPLOW TO VEHICLE
Other Blades:
Engage pushplates into
attachment arms.
HT Series™ Blades only:
Attach all electrical
connectors. With the ignition in the "ON"
position, turn ON the control and activate the
FLOAT mode.
3.
HS Compact Plow:
Rotate and unlock
connecting pins on receivers. Plug in the
electrical harness. Turn snowplow control in
vehicle ON and activate the FLOAT mode.
Stand in front of blade.
Other Blades:
Stand in front of blade. Fully
raise pin release handle to release connecting
pins.
4.
HS Compact Plow:
Push top of headgear
toward vehicle to allow connecting pins to fully
engage the connecting pin holes. Verify that
both connecting pins are engaged through all
holes on the headgear and receivers.
See page 38
for illustrations.
Other Blades:
Push headgear toward vehicle
to allow connecting pins to fully engage
pushplates. If unable to push headgear from
in front of blade, stand in front of headgear on
driver's side and push headlamp bracket.
HT Series Blades:
Using headgear push
bar, push headgear toward vehicle to allow
connecting pins to fully engage pushplates.
See page
39 for illustrations.
