Lit. No. 72446, Rev. 05
39
November 15, 2020
OPERATING YOUR SNOWPLOW
Fish-Stik
®
HAND-HELD CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. Press the ON/OFF button on the control. The
power indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF button operates as an
emergency stop if required.
Function Time-Outs
To limit the amount of electrical energy required
from the vehicle, all control functions, except
LOWER/FLOAT, time out (stop) automatically after
a period of time. The blade will coast to a stop.
NOTE: If a control function times out before
desired blade movement is complete, release
the button and press it again.
For snowplow-specific function timeouts, see the
Timeout Table in the Appendix.
RAISE
LOWER
R
L
ON/OFF
FLOAT
1
3
2
4
S C O
O
P
R
E
T
R A C T
W
IN
G
W I N
G
Power Indicator
Light (red)
ON/OFF Button
(emergency stop)
FLOAT Light
(green)
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.
