Lit. No. 72446, Rev. 05
46
November 15, 2020
OPERATING YOUR SNOWPLOW
Function Description of Operation
L
(Angle
Left)
Straight blades:
Move the control lever
straight to the left to angle the blade left.
All others:
With wings in a straight line,
move the control lever straight to the left to
move both wings to the angle left position.
The left wing retracts while the right wing
extends (XtremeV™, XV2™, EZ‑V
®
).
R
(Angle
Right)
Straight blades:
Move the control lever
straight to the right to angle the blade right.
All others:
With wings in a straight line,
move the control lever straight to the right to
move both wings to the angle right position.
The right wing retracts while the left wing
extends (XtremeV™, XV2™, EZ‑V
®
).
SCOOP/RETRACT Blade and WING Positions
XtremeV, XV2, EZ-V, and XLS™ Blades
Moving the control lever from the center position
toward the word SCOOP or RETRACT on the face
of the control body will cause both wings to move
at the same time into the following blade positions.
Moving the control lever from the center position
toward the words WING IN/OUT, on either side of
the face of the control body will cause either wing
to move independently of the other as described in
the following table.
Function Description of Operation
SCOOP
Move the control lever toward the word
SCOOP on the control face to extend both
wings forward into the scoop position.
RETRACT
Move the control lever toward the word
RETRACT on the control face to draw both
wings into the fully retracted/vee position.
