background image

tRansmitteR paneL/pLastiC pLugs

There are two types of panels in the M-Scope system. They are called ‘Transmitter’ and ‘Receiver’ panels. Here are several ways 
in which you can easily tell them apart. 

Fig. g

a.    Receiver panels have 32 spring loaded contact pins  
 

Transmitter panels have 16 spring loaded contact pins 

b.  Receiver panels have one LED in the middle of each of the two outer vertical edges  Transmitter panels have 

plain black plastic plugs in the places where the receiver panels have LEDs.

 

c.  Receiver panels have green “dots” on the exit side, underneath the latches. and Transmitter panels have red 

“dots” on the exit side, underneath the latches. 

ReCeiveR paneL

tRansmitteR paneL

32

16

 gReen/ReCeiveR OR ReD/tRansmitteR“DOt” 

(underneath latches on exit end of panels)

ReCeiveR paneL/zOne LeD’s

step

6

Fig. g

6

leD testing

The LEDs can be controlled manually while in the diagnostics mode by pressing the different numeral keys. Duration is approximately 4.5 
seconds, then returning to diagnostic mode. The ready light will go green and the LED bar graph displays the signal strength.  

Numeral 1 key 

Bar graph LED 1 on 

GREEN 

All Zone [“RX” ] 
Lights glow 

GREEN

Status Light OFF

Ready [go/stop] Light 
OFF

Numeral 2 key

Bar graph LED 2 on 

GREEN

Top Zone Light 

GREEN

Middle Zone Light

 

GREEN

Bottom Zone Light 

YELLOW

Status Light OFF

Ready  Light OFF

Numeral 3 key

Bar graph LED 3 on 

GREEN

Top Zone Light 

GREEN

Middle Zone Light 

GREEN

Bottom Zone Light 

RED

Status Light OFF

Ready  Light OFF

Numeral 4 key

Bar graph LED 4 on 

GREEN

Top Zone Light 

GREEN

Middle Zone Light 

GREEN

Bottom Zone Light 

GREEN

Status Light OFF

Ready Light OFF

Numeral 5 key

Bar graph LED 5 on 

YELLOW

Top Zone Light

 

GREEN

Middle Zone Light 

YELLOW

Bottom Zone Light 

GREEN

Status Light OFF

Ready Light OFF

Numeral 6 key

Bar graph LED 6 on 

YELLOW

Top Zone Light 

GREEN

Middle Zone Light 

RED

Bottom Zone Light 

GREEN

Status Light OFF

Ready Light OFF

Numeral 7 key

Bar graph LED 7 on 

RED

Top Zone Light 

GREEN

Middle Zone Light 

GREEN

Bottom Zone Light 

GREEN

Status Light OFF

Ready Light OFF

Numeral 8 key

Bar graph LEDs all 
OFF

Top Zone Light 

YELLOW

Middle Zone Light 

GREEN

Bottom Zone Light 

GREEN

Status Light 

GREEN

Ready Light GREEN

Numeral 9 key

Bar graph LEDs all 
OFF

Top Zone Light

 RED

Middle Zone Light 

GREEN

Bottom Zone Light 

GREEN

Status Light 

YELLOW

Ready Light 

YELLOW

Down arrow key

Bar graph LEDs all 
ON

Top Zone Light 

RED

Middle Zone Light 

RED

Bottom Zone Light 

RED

Status Light 

RED

Ready Light 

RED

Up arrow key

Bar graph LEDs all 
OFF

Zone Lights all 
GREEN

Status Light OFF

Ready Light OFF

Toggles 50/60Hz 
selection

Numeral 0 key 

Under system control

Under system 
control

Under system control

Under system control

RETURNS 
TO NORMAL 
OpERATING MODE

19

Huvudkontor Order & Lager: Malux Sweden AB, Box 221, 891 25 Örnsköldsvik. Växel 0660-29 29 00, fax 0660-850 85.

Försäljningskontor: Stockholm, Göteborg, Stenungsund, Kalmar. För adresser: www.malux.se.

Huvudkontor Order & Lager: Malux Sweden AB, Box 221, 891 25 Örnsköldsvik. Växel 0660-29 29 00, fax 0660-850 85.

Försäljningskontor: Stockholm, Göteborg, Stenungsund, Kalmar. För adresser: www.malux.se.

Summary of Contents for M-Scope













Reviews: