Care
• The pad and headrest are machine washable. Wash the pad
and headrest separately in cold water on the gentle cycle.
Do not use bleach. Tumble dry separately on low heat and
remove promptly.
• The frame and base tray may be wiped clean using a mild
cleaning solution and a damp cloth. Do not immerse the
base tray.
• The food trays are dishwasher safe. Simply remove the food
tray from the base tray and place in your dishwasher.
To remove the pad:
• Remove the four elastic loops from the pegs on the
underside and back of the seat.
• Unfasten the pad strap and headrest strap from the
seat back.
• Feed the shoulder portion of the waist/shoulder belts
through the slots in the seat back, the pad and the headrest.
• Feed the waist portion of the waist/shoulder belts and
crotch belt down through the slots in the seat.
• Remove the waist/shoulder belts and crotch belt through
the slots in the pad.
• Unfasten the pad fasteners from the front edge of the
seat bottom.
• Remove the pad.
To replace the pad and headrest:
refer to Assembly
steps 16-23.
IMPORTANT!
Never use this product without the
restraint system. Replace the waist/shoulder belts and
crotch belt.
Printed in China
B2105-0920
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©2002 Mattel, Inc. All Rights Reserved.
® and
TM
designate U.S. trademarks of Mattel, Inc.
For other countries, outside the United States:
Canada:
call
1-800-567-7724
, or write to: Mattel Canada Inc., 6155
Freemont Blvd. Mississauga, Ontario L5R 3W2.
Great Britain:
telephone 01628 500302.
Australia:
Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand:
16-18 William Pickering Drive, Albany 1331, Auckland.
• Fit the holes on the base tray latches onto the pegs on the
back of the high chair frame.
• With the legs all the way open, lower the seat to position 1
(the lowest position).
• Pull the frame release latches forward and push the rear legs
toward the front legs.
Peg
Base
Tray
Hole
Pull Frame
Release Latch
Storage
15
16
