4
Restraint Pad
Restraint Belt
Restraint Belt
1
• Place your child in the seat. Position the
restraint pad between your child’s legs.
• Fasten the restraint belts to each side of the
restraint pad.
Make sure you hear a “click”
on both sides.
• Check to be sure the restraint system is
securely attached by pulling it away from
your child. The restraint system should
remain attached.
• Tighten each waist belt so that the restraint
system is snug against your child. Please
refer to the next section for instructions to
tighten the waist belts.
A
B
B
A
2
Free End
Free End
Anchored End
Anchored End
LOOSEN
TIGHTEN
To tighten the belts:
• Feed the anchored end of the restraint belt
up through the buckle to form a loop
A
.
Pull the free end of the restraint belt
B
.
To loosen the belts:
• Feed the free end of the restraint belt up
through the buckle to form a loop
A
. Enlarge
the loop by pulling on the end of the loop
toward the buckle. Pull the anchored end of
the restraint belt to shorten the free end of
the restraint belt
B
.
Securing Your Child
