7
Assembly
3
• Fit the brace (attached to the pad) between
the side rails.
Hint:
Align the holes in the brace with the peg
and hole in side rails. The brace is designed
to fit one way. If it does not seem to fit, turn it
around and try again.
Side Rail
Soothing Unit
Brace
• Fit the soothing unit onto a side rail.
• Insert two M4,5 x 25 mm screws into the
soothing unit and tighten.
• Repeat steps 1 and 2 to assemble the other
side rail to the soothing unit.
2
1
bly
BACK VIEW
4
• Insert an M4,5 x 25 mm screw into each end of
the brace and tighten.
Hint:
You may want to tip the assembly on its
side to assemble the screws.
y g
