Using the Projector
Reel Storage
Compartment
Slot
Advance
Lever
Tripod
Projector
Focus Knob
On/Off Switch
On/Off Switch
You can use the projector to send bright, clear images from any
View-Master
®
reel onto walls, ceilings or just about anywhere.
• Unfold the tripod into the open position.
• Stand the projector on its legs on a hard, flat surface.
• Point the projector at the desired viewing area.
• Tighten the angle adjustment knob. Do not over-tighten.
•
To turn the projector on:
Slide the on/off switch forward.
•
To turn the projector off:
Slide the on/off switch backward.
•
To insert the reel:
Fit the reel into the slot
with the printed side to
the rear and push all
the way down.
•
To remove the reel:
Pull the reel straight up.
Helpful Hint:
Remove
the reel before using the
telescope.
Slot
Reel
6
