J4394pr-0921
14
Note:
There are front and rear wheels. The rear wheels have a
grooved hub while the front wheels do not.
• Locate a front wheel. Place the front wheel onto the front axle with
the “lug nuts” facing out.
24
Front Wheel
"Lug Nuts"
23
• Fit a front axle cap onto the front axle post and hold it in place.
• Insert a screw through the large opening in the front axle cap and
the hole in the front axle. Tighten the screw.
• Repeat this procedure to fasten the bottom of the other front axle.
Front
Axle
Post
Front Axle Cap
• Turn both front axles torward the front end of the vehicle until they
drop into the axle slots.
• Insert a screw through each wheel well and into each fender.
Tighten the screws.
21
22
Fender
Wheel Well
Front Axle
Front Axle Slot