background image

Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

•  When using the remote, make sure that the arrow on the 

mobile’s dome is pointing towards the transmitter window 
on the remote. 

For best results make sure the path 

between the transmitter window on the remote and 
the dome on the mobile are in a direct line and free of 
obstacles. Rotate the mobile dome so that the arrow 
points to the area from which you’re most likely to 
use the remote.

 For example, if you’ll most often be using 

the remote from the doorway of the nursery, make sure 
that the arrow on the mobile dome is pointing towards the 
doorway and that the path between the mobile dome and 
the doorway is free from obstructions.

Power/Volume Switch

•  Slide this switch to on with low 

volume  ; on with high volume 

;

on with no sound (lights only)  ;
or off  .

Song Select Button

•  Press this button to choose a song. 
•  Each time you press the song select 

button the mobile will switch to the 
next song until it returns back again 
to the first. 

Use

Light Select Button

•  Press the button to choose from four 

different light modes:

 

1

 Twinkling lights around baby's room

 

2

 Glowing night light

 

3

 Twinkling and glowing lights

 

4

 No lights (music only)

•  Each time you press the light select 

button the mobile will switch to the 
next of the four modes until it returns 
back again to the first.

Start Button

•  Press the start button to activate

the mobile. 

•  The mobile will play for about

10 minutes.

•  To restart or pause the mobile, press 

the start button on the remote control 
or the start button on the mobile. 

Notes: 
-  The remote control will activate the 

mobile from one foot to as far as
20 feet away. 

-  After approximately two hours 

without activation, the mobile shuts 
down. Turn the Power/volume switch 
to off and then on to restart the 
mobile and reactivate the start button 
and the remote. 

Start Button

IMPORTANT!

 

•  In the unlikely event that use of the remote interferes with 

normal use of other remote controlled equipment, such as 
televisions and stereos, or use of other electric or battery 
powered appliances interfere with operation of the mobile, 
do not use both appliances at the same time.

•  For best performance between the mobile and the remote, 

avoid using the remote in areas of bright light. In bright 
natural or artificial light, you may notice loss of range. 
Move the mobile or otherwise reduce the amount of light 
to improve performance.

Mobile Dome

Remote

8

Summary of Contents for M6162









Reviews: