background image

14

V3710pr-0920

• Your Power Wheels

®

 battery is a non-spillable sealed 

lead-acid battery. It must be recycled or disposed of in 
an environmentally sound manner.

• Do not dispose of a lead-acid battery in a fire. The 

battery may explode or leak.

• Do not dispose of a lead-acid battery in your regular, 

household trash. The incineration, landfilling or mixing 
of sealed lead-acid batteries with household trash is 
prohibited by law in most areas.

• Protect the environment by not disposing of this 

product with household waste (2002/96/EC). Check 
your local authority for recycling advice and facilities 
(Europe only).

•  Return an exhausted battery to a federal or state approved 

lead-acid battery recycler, such as a Power Wheels

®

 

authorized service center or a local seller of 
automotive batteries. For the authorized service 
center location nearest to you, please visit us on-line 
at 

www.powerwheels.com

 or call 

1-800-348-0751

Contact your local waste management officials for 
other information regarding the environmentally sound 
collection, recycling and disposal of lead-acid 
batteries. If you live in the State of Florida or the State 
of Minnesota, it is prohibited by law for anyone to 
throw away lead-acid batteries in the municipal 
waste stream.

BATTERY DISPOSAL

BATTERY CARE

VEHICLE CARE

Check all screws and their protective coverings 

• 

regularly and tighten as required. Check plastic parts 
on a regular basis for cracks or broken pieces.
During snowy or rainy weather, the vehicle should be 

• 

stored inside or under a protective cover.
Avoid operating the vehicle in wet or snowy conditions, 

• 

and do not spray the vehicle with a hose. Water or 
moisture in the motors or electrical switches can cause 
them to corrode, and could cause switch or 
motor failure.
Avoid operating the vehicle on sand, loose dirt or 

• 

gravel. Sand, loose dirt or gravel in the motors or 
electrical switches can cause them to jam, and could 
cause switch or motor failure.
The vehicle can be wiped down with a soft, dry cloth. 

• 

For a shiny fi nish, you can wipe plastic parts with 
a non-wax furniture polish applied to a soft cloth. 
Do not use automotive wax. Do not use soap and water 
or spray the vehicle with a hose.
To ensure your vehicle stays in good operating order, 

• 

we recommend you periodically have your vehicle 
checked by a Power Wheels

®

 authorized service center.

If a battery leak develops, 

avoid contact with the 

leaking acid and place the damaged battery in a plastic 
bag. See next section for proper disposal.

If acid comes in contact with skin or eyes,

 flush with 

cool water for at least 15 minutes and call a physician.

If acid is internally ingested, 

give water, milk of 

magnesia or egg whites immediately. Never give emetics 
or induce vomiting. Call a physician.

Do not allow the battery to run down completely 

• 

before charging.
Charge the battery before storing the vehicle, and at 

• 

least once per month, even if the vehicle has not 
been used.
Charge the battery after each use, regardless of how 

• 

long the vehicle was used.
Leaving the battery in a discharged condition will 

• 

ruin it.
Always remove an exhausted battery from the vehicle. 

• 

Battery leakage and corrosion can damage the vehicle.
Do not store the battery in temperatures above 75° F or 

• 

below -10° F.

Summary of Contents for Power Wheels Lil's Quad V3710





















Reviews: