background image

13

ASSEMBLY

M3864pr-0920

20

•  Fit the tab on one side of a headlight lens into the notch in the grille.
•  Push firmly to snap the tab on the other side of the headlight lens into

the grille.

•  Repeat this procedure to assemble the other headlight lens to the grille.

Headlight 
Lens

Tab

Grille

17

•  Using safety scissors, separate the sport bar covers. Dispose of the 

plastic connector.

•  With the ends of the sport bar angled toward you, fit the sport bar 

cover marked “BAC” to the sport bar.

•  Align the holes in the sport bar with the holes in the sport bar cover.
•  Insert two #6 x 1

1

/

2

" screws through the sport bar cover and into the 

sport bar, as shown. 

Sport Bar 
Cover 

(BAC)

Sport Bar

Holes

18

•  Align the tips of the screws with the holes in the other sport bar cover 

marked RON. Fit the two sport bar covers together.

•  Tighten the screws.

Sport Bar 
Cover 

(RON)

Screw Tips

Sport Bar

19

•  With the sport bar positioned to angle towards the rear of the vehicle, 

fit the ends of the sport bar into the holes in the vehicle on either side 
of the seat.

•  Press firmly on each side of the sport bar to fit it into the vehicle.

Rear of 
Vehicle

Seat

Sport Bar

Hole

Hole

Summary of Contents for Power Wheels M3864

























Reviews: