background image

21

Advanced Use - High Speed Drive

Before you disconnect the high speed lock-out, make sure
your child knows how to start and stop the vehicle and
knows the rules for safe driving. When the high speed
lock-out is disengaged, the vehicle can be driven forward
in low speed (2

1

/

2

mph, maximum) or high speed (5 mph,

maximum).

• Remove the lock-out screw from the shifter box using a

Phillips screwdriver. Store the screw in the hole in the
shifter for future use. You can re-insert the screw into the
shifter box if you want to lock-out high speed and allow
operation of the vehicle in low speed only.

REMOVE LOCK-OUT

SCREW ON SIDE
OF SHIFTER FOR

HIGH SPEED
OPERATION

Please Note: To avoid damaging the motors and gears,
stop the vehicle before shifting between low and high
speed.

• Make sure the shifter is in the HIGH SPEED position (

).

• Press the foot pedal. The vehicle will drive forward 

at a maximum of 5 mph.

REMOVE LOCK-OUT

SCREW ON SIDE
OF SHIFTER FOR

HIGH SPEED
OPERATION

Shifter

Disconnecting the High Speed Lock-Out

To Drive

How to Operate Your Vehicle

How to Operate Your Vehicle

Lock-Out
Screw

Shifter

*One year limited warranty from the date of
purchase on the Power Wheels

®

vehicle.

Six month limited warranty on 12 volt battery.

For the original purchaser, this one year limited warranty
covers the Power Wheels

®

ride-on vehicle (purchased from

Power Wheels

®

) against defects in materials and work-

manship. The six month limited warranty applies only to the
12 volt battery included by Power Wheels

®

with the original

purchase of the vehicle.

This warranty covers normal use and does not cover the
Power Wheels

®

vehicle or battery if it has been damaged by

unreasonable use, neglect, accident, abuse, misuse,
improper service or other causes not arising out of defects
in materials or workmanship. Evidence of any attempt at
consumer repair will void this warranty. This warranty does
not cover, and is intended to exclude, any liability on the
part of Power Wheels

®

, whether under this warranty or

implied by law, or any indirect or consequential damages for
breach of warranty. Some states do not allow the exclusion
or limitation, so this limitation may not apply to you.

Should you need service or assistance with your vehicle
during the warranty period, do not return the vehicle to
the store. 
Power Wheels

®

has provided a nationwide

network of authorized service centers. Please refer to the
list in this manual. Power Wheels

®

is continually expanding

our Authorized Service Center Network. If there is not an
authorized service center in your area, please call
Consumer Affairs for information, 1-800-348-0751.

This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.

Please save your original sales receipt.

Bumper-to-Bumper*

Limited Warranty

M

• Help your child practice steering to learn how far and

how quickly to turn the handlebar when driving forward
in high speed.

• Stopping in high speed is the same as stopping in low

speed. The vehicle automatically stops when your child’s
foot is lifted from the pedal.

Summary of Contents for Power Wheels TrailBeast 74527





























Reviews: