4
Lower Loop
Support
Lower Loop Track
Upper Loop Support
Billboard
• Fit a lower loop support into the socket in the bottom of a lower
loop track.
Hint:
The lower loop support only fits one way. If it does not seem
to fit, turn it around and try again!
• Repeat this procedure to assemble the other lower loop support
to the other lower loop track.
Assembly
Socket
•
"Snap"
an upper loop track onto the end of a lower loop track.
• Repeat this procedure to assemble the other upper loop track to
the other lower loop track.
2
Upper Loop Track
Lower Loop Track Assembly
Upper Loop Support
Upper Loop Support
Ridge
• Slide the upper loop supports onto the ridge on the upper loop.
Push to
"snap"
each upper loop support in place.
4
• Fit the hooked tabs on the inside edges of the lower loop together.
• Place the labels exactly as shown on both of the upper loop
supports and the billboard. For best results, avoid repositioning
a label once it has been applied.
5
• Place the loop assemblies next to each other as shown. Slide the
loop assemblies together.
3
6
1
