9
Assembly
Battery Installation
Installation
• Locate the battery compartment door on the swing frame.
• Insert a coin into the battery compartment door and pry the
battery compartment door off of the swing frame.
• Insert four “D” (LR20)
alkaline
batteries as indicated inside
the battery compartment.
• Replace the battery compartment door.
Battery
Compartment
Door
Hint:
When swinging, sound or power L.E.D. slows/dims/stops,
it’s time to replace the batteries! We recommend using
alkaline
batteries for longer battery life.
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose
of batteries safely. Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are only
to be charged under adult supervision.
1.5V x 4
“D” (LR20)
SHOWN ACTUAL SIZE
• Fit the toy bar plugs into the sockets on the swing tubes.
Hint:
If the toybar plugs do not fit into the sockets, turn the
toybar around. Now, fit the plugs into the sockets.
• Insert two #6 x 1.59 cm (1
5
/
8
") screws through each plug
and into each socket. Tighten the screws.
22
Plug
Toybar
(Toys may
be different)
Plug
Socket
Plug
Hub
#6 x 1.59 cm (
5
/
8
") Screw - 4
Shown Actual Size
• Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg on
the back of the accessory bins.
21
Elastic
Loop
Elastic
Loop
