background image

10

Securing Your Child

• Tighten each waist belt/shoulder belt so that the restraint 

system is snug against your child. Please refer to the 
next section for instructions to tighten the waist belts/
shoulder belts.

2

• 

To tighten the waist belts:

 Feed the anchored end of the 

waist belt up through the buckle to form a loop 

A

 . Pull the 

free end of the waist belt 

B

 .

• 

To tighten the shoulder belts:

 Hold the adjuster and pull the 

shoulder belt down 

C

 .

TIGHTEN

3

• 

To loosen the waist belts:

 Feed the free end of the waist belt 

up through the buckle to form a loop 

A

 . Enlarge the loop by 

pulling on the end of the loop toward the buckle.

• Pull the anchored end of the waist belt to shorten the free end 

of the waist belt 

B

 .

• 

To loosen the shoulder belts:

 Lift the adjuster 

C

 .

Note:

 After adjusting the restraint system to fit your child, 

make sure you pull on it to be sure it is securely fastened.

LOOSEN

4

• Place your child in the seat. Position the crotch belt between 

your child’s legs.

• Fasten both waist/shoulder belts to each side of the crotch 

belt. Make sure you hear a 

"click"

 on both sides.

• Check to be sure the restraint system is securely attached by 

pulling it away from your child. The restraint system should 
remain attached.

1

Crotch Belt

Waist/Shoulder 
Belt

Waist/Shoulder 
Belt

Adjuster

Adjuster

Summary of Contents for T0250

















Reviews: