background image

10

Prevent serious injury or death from falls 
or sliding out: 

Always use the restraint 

system for the upright and reclined positions 
of the seat. Adjust restraint to fit your child 
snugly. The tray is not designed to hold the 
child in the chair.

•  Place your child in the seat. Position the crotch belt between 

your child’s legs.

•  Fasten both waist/shoulder belts to each side of the crotch belt. 

Make sure you hear a

 "click" 

on both sides.

•  Check to be sure the restraint system is securely attached by 

pulling it away from your child. The restraint system should 
remain attached.

Waist/Shoulder Belt

Waist/Shoulder Belt

Secure Child

1

 WARNING

•  Tighten each waist belt and shoulder belt so that the restraint 

system is snug against your child. Please refer to the next 
section for instructions to tighten the waist belts.

2

TIGHTEN LOOSEN

To tighten the waist belts:

•  Feed the anchored end of the waist belt up through the buckle to 

form a loop 

A

.

• Pull the free end of the waist belt 

B

.

• Repeat this procedure to tighten the other waist belt.

To loosen the waist belts:

•  Feed the free end of the waist belt up through the buckle to form 

a loop 

A

.

•  Enlarge the loop by pulling on the end of the loop toward 

the buckle.

•  Pull the anchored end of the waist belt to shorten the free end of 

the waist belt 

B

.

•  Repeat this procedure to loosen the other waist belt.

Anchored End

Anchored End

Free End

Free End

Buckle

3

Crotch Belt 

Crotch Belt 

Summary of Contents for T1838

















Reviews: