7
PUSH
Seat Bottom Tube Ends
• Push each seat height adjuster to be sure they are completely on
the seat bottom tubes.
• Insert a #8 x 1,9 cm screw through each seat height adjuster and
the ends of the seat bottom tube. Tighten the screws. This may
require extra force.
PUSH
Base
• Fit the ends of the base into the frame front legs.
• Fit a screw retainer over a hole in the front leg.
• Insert a #10 x 2,2 cm
black
screw through the screw retainer
and front leg. Tighten the screw.
• Repeat this procedure to secure the other end of the base with
the remaining screw retainer and #10 x 2,2 cm
black
screw.
Hint:
The #10 x 2,2 cm
black
screws may have been assembled to
the screw retainers.
Screw Retainers
Assembly
10
11
Seat Height Adjuster
• Push each seat height adjuster to be sure they are completely on
the seat bottom tubes.
• Insert a #8 x 1,9 cm screw through each seat height adjuster and
the ends of the seat bottom tube. Tighten the screws. This may
require extra force.
Seat Bottom Tube Ends
12
