6
Assembly
• Insert an M5 x 38.5 mm screw into each side of the frame.
Fully
tighten the screws with the Allen wrench.
M5 x 38.5 mm
Screw
M5 x 38.5 mm
Screw
5
6
• Position the seat bottom face down on a flat surface.
• With the seat back also face down, fit the recline posts into the
upper slots in the seat bottom.
Seat Bottom
Upper Slots
Seat Back
Recline Posts
• Push the seat back down to fit the tabs on the edge of the seat
back to the tabs on the seat bottom.
7
• Insert the hinge rod through the hinge on the seat bottom.
• Insert an M4.5 x 12 mm screw into the hinge rod. Tighten the
screw with a Phillips screwdriver.
8
Hinge
M4.5 x 12 mm
Screw
Hinge Rod
Hinge Rod
Seat Back Tabs