33
MODEL S71012A
CAMERA SPECIFICATIONS
•
Moticam 580
•
HDMI 1080 output
•
Capture images at 5.0MP directly onto an SD card
•
Computer connection allows 800x600 resolution
through included Motic Images Software
•
Connect via RCA for 480 TV lines of resolution
Model S71012 is supplied with DIN standard 4X
(0.10N.A.), 10X (0.25 N.A.) 40X (0.65N.A.) retractable
and 100X (1.25 N.A.) retractable oil immersion objective
lenses.
Illumination: Insert power plug into 12VDC switching
power converter, then insert plug on other end of
converter into power jack on back of microscope base.
Plug AC cord into either a 120v or 240v outlet and
converter automatically switches to proper output voltage.
Refer to Quick Start Guide located on your CD for
Installation of the software and operation of the camera.
The three-position sliding rod located on the side of the
viewing head allows user to easily direct microscope
image to desired path. Pushing rod completely into
head directs 100% of microscope image into binocular
eyepieces. Rod at mid-position (pull or push rod until you
feel a gentle click stop) directs 100% of image to built-
in camera. Rod pulled to fully extended position directs
30% of image to binocular eyepieces and 70% to built-in
camera.
To operate this microscope see General Instructions for
use of a Compound Microscope located on pages 14 and
15.
Lamp replacement: See Halogen lamp replacement on
page 8 (H).
Fuse replacement: See Replacing Fuses located on page
10 (R).
